极速时时彩

购物车  |  联系  |  info@coolrm.com  | 
极速时时彩平台Urpl_omega-qr-code 极速时时彩微信公众号
咨询热线 400-619-0559
极速时时彩平台peOL_

HIGH PRESSURE SOLENOID VALVE

SVH-120

极速时时彩平台HBvU_High Pressure Solenoid Valve |Fuel Cell Valve | High Pressure Valve
 | SVH-120 极速时时彩平台UFlg_

查看下面所有型号

极速时时彩平台BKdm_1年保修
  • Stainless Steel Construction
  • ¼ or ½" Ports
  • Pressures up to 10,000 psi (Depending on Model)
阀门 - 查看相关极速时时彩下载

极速时时彩下载描述

The new SVH-120 Series is a versatile, ¼ or ½" full port, high pressure, pilot operated, solenoid valve. The SVH-130 Series is a compact size, for where space is limited. The compact SVH-120 Series is ideal for flow control of high pressure air, water, compressed natural gas (CNG), hydrogen, nitrogen, and other gases or light liquids compatible with the materials of construction, and leverages this high pressure flow to its own advantage in operating effectively and efficiently.

The SVH-120 style valve is perfect for use in hydrogen dispensing tanks, commonly used in the refueling of fleet vehicles. It is also a used in many compressed natural gas applications. With available pressures to 10,000 psig there are a wide range of applications that include water, nitrogen and many other compatible liquids. This solenoid valve must be mounted with the solenoid upright and vertical.

Specifications
Materials Of Construction
Valve Body: 316 SS
Pistons: PAEK
O-Rings: Buna-N/FKM “-VT”/PTFE
Backing Rings: Buna-N/FKM “-VT”/PTFE
Piston Rings/Seal: PTFE/302 SS
Cartridge: 316 SS/430 SS
Pilot/Seal: 303 SS/PTFE
Spring: 302 SS
Plunger: 430 SS
Bonnet Retainer: 430 SS
Cartridge Gasket: Nylon
Fluid Temp Range: -37 to 121°C (-35 to 250°F), -26 to 204°C (-15 to 400°F) (-VT)
Shipping Weight: 1.8 Kg (4 lbs){SVH-121}, 3.2 Kg (7 lbs) {SVH-122}
Cv: 4.5
Port Connections: ¼ NPT (SVH-121), ½ NPT (SVH-122)
Electrical
Duty: Continuous
Connection: ½ NPT, 18" leads
Power: 10 watts, 22 watts (-XP)
    A C Inrush: 1 amp @120 Vac, 2.5 amp @120V AC (-XP)
    AC Holding: 0.1 amp @ 120 Vac, 0.2 amp @ 120 Vac -XP
Insulation: Class “F”, Class “H” -XP
Maximum Operating Pressure:
    A C Voltage: 7,500 Psig, 10,000 psig -XP
    DC Voltage: 3,600 PSIG, 7,200 psig -XP
Minimum Pressure: 100 psig
订购 所有价格均为人民币税前价格,不包括13%增值税和运费!(指定型号)
极速时时彩平台FuXa_网上下单立享5%折扣!
极速时时彩下载编号极速时时彩下载描述
数量
极速时时彩下载描述
极速时时彩平台rBKX_Quick Ship
SVH-121
¥6,760.00
货期: 5 周
 
Coil Voltage 120 Vac, Cv 1.1, Max Pressure 7500 psig, Max Pressure (-XP Option) 10,000 psig
极速时时彩平台IWIo_Quick Ship
SVH-121-120D
¥6,515.00
货期: 6 周
 
Coil Voltage 120 Vdc, Cv 1.1, Max Pressure 3500 psig, Max Pressure (-XP Option) 10,000 psig
极速时时彩平台ZVsq_Quick Ship
SVH-121-240A
¥6,515.00
货期: 6 周
 
Coil Voltage 240 Vac, Cv 1.1, Max Pressure 7500 psig, Max Pressure (-XP Option) 10,000 psig
极速时时彩平台UqvI_Quick Ship
SVH-121-24A
¥6,515.00
货期: 6 周
 
Coil Voltage 24 Vac, Cv 1.1, Max Pressure 7500 psig, Max Pressure (-XP Option) 10,000 psig
极速时时彩平台CeHV_Quick Ship
SVH-121-24D
¥6,515.00
货期: 6 周
 
Coil Voltage 24 Vdc, Cv 1.1, Max Pressure 3500 psig, Max Pressure (-XP Option) 10,000 psig
极速时时彩平台gmvj_Quick Ship
SVH-122
¥7,440.00
货期: 6 周
 
120 Coil Voltage 120 Vac, Cv 4.5, Max Pressure 7500 psig, Max Pressure (-XP Option) 5000 psig
极速时时彩平台RbnQ_Quick Ship
SVH-122-120D
¥7,195.00
货期: 6 周
 
Coil Voltage 120 Vdc, Cv 4.5, Max Pressure 3600 psig, Max Pressure (-XP Option) 7200 psig
极速时时彩平台Elkj_Quick Ship
SVH-122-240A
¥7,195.00
货期: 6 周
 
Coil Voltage 240 Vac, Cv 4.5, Max Pressure 7500 psig, Max Pressure (-XP Option) 5000 psig
极速时时彩平台Voxg_Quick Ship
SVH-122-24A
¥7,195.00
货期: 6 周
 
Coil Voltage 24 Vac, Cv 4.5, Max Pressure 7500 psig, Max Pressure (-XP Option) 5000 psig
极速时时彩平台pbIp_Quick Ship
SVH-122-24D
¥7,440.00
货期: 6 周
 
Coil Voltage 24 Vdc, Cv 4.5, Max Pressure 3600 psig, Max Pressure (-XP Option) 7200 psig
所有金额以RMB显示
注: Comes complete with operator’s manual.
For units for Hydrogen service (Helium leak test) add “-HY” to the model number, for an additonal charge.
For Normally Open valve configuration add “-NO” to the model number, for an additional charge. **Normally Open valve configuration is not available on DC models.
For Oxygen cleaned units add “-OX” to the model number, for an additional charge.
For units with straight thread J1926 with o-ring seal add “-ST” to the model number, for an additional charge.
For units with a flared tubing connection add “-TC” to the model number, for an additional charge.
For units with FKM o-rings add “-VT” to the model number, for an additional charge.
For units with a higher pressure coil add “-XP” to the model number, for an additional charge.